[SIGHT] HOW TO INSTALL SIGHT
Video Contents Random
•
4m 45s
The sight is attached to the upper part of the riser as follows:
First, fix the mounting block to the riser to install the sight.
Then, connect the carbon extension to the mounting block.
Align the small groove on the carbon extension with the center hole of the mounting block and tighten the bolt to secure it.
Finally, connect the side pin to the head attached to the vertical sight bar, which moves up and down. Once secured, the sight installation is complete.
Up Next in Video Contents Random
-
[CUSHION] ADJUSTMENT OF SPRING STRENGTH
The spring tension of the cushion plunger determines how much the arrow is pressed against the plunger at the moment of release and how strongly it rebounds, directly affecting lateral arrow movement and flight stability.
If the spring is too soft, it absorbs more lateral impact, but excessive so... -
14. Nocking Point Setting
ノッキングポイント_日本語吹替
-
[ACCESSORIES] HEX WRENCH - SPECIFICAT...
hex wrench, or hex key, is an L-shaped assembly tool used to turn and fit hexagonal socket bolts and screws.
Most archery equipment is assembled using bolts.
It is essential for adjusting components such as the sight, stabilizer, arrow rest, cushion plunger, and limb mounting.
![[CUSHION] ADJUSTMENT OF SPRING STRENGTH](https://vhx.imgix.net/wwwaricjp/assets/10e10443-d880-468b-8c6b-7801daf6734a?auto=format%2Ccompress&fit=crop&h=360&w=640)
![[ACCESSORIES] HEX WRENCH - SPECIFICAT...](https://vhx.imgix.net/wwwaricjp/assets/0112bc4c-3f43-4693-8968-bb6aab20b6dd?auto=format%2Ccompress&fit=crop&h=360&w=640)