By adjusting the elevation pin up and down, you set the aiming point for each distance such as 10m, 20m, 30m, 50m, and 70m.
Left–right adjustments are made when wind or bow settings cause the arrow to drift sideways, allowing you to fine-tune the pin position.

test adfadfadfasdf

A pin nock is a dual-structure nock system in which a pin insert is first installed at the end of the arrow shaft, and a specially designed nock is fitted over it.
Compared to standard (insert) nocks, it offers superior alignment accuracy and excellent shaft protection, making it recommended not ...

A finger sling is an accessory that helps the archer shoot safely without gripping the bow.
Worn on the thumb and index finger or middle finger, it prevents the bow from falling from the hand at the moment of release.
It allows the archer to avoid gripping the bow tightly.
It creates a “natural g...

アンカーリング _日本語吹替

A magnetic rest is a high-end arrow rest that uses magnetic force to automatically move the support arm, allowing the arrow to leave smoothly without any interference during the release.
It is widely used by beginners as well as intermediate and advanced archers, and provides excellent performanc...

T-gauge is a T-shaped measuring tool used after stringing the bow to accurately measure and adjust string length, the nocking point, and arrow position (rest height). It is made of metal or carbon.
By checking whether the bowstring and arrow are properly aligned vertically, it enables precise se...

An out nock is a type of nock that fits over the outside of the arrow shaft.
It wraps around the end of the shaft without requiring a separate insert, reducing sensitivity and making it one of the most commonly used basic nock types among both beginners and competitive archers.

When a stabilizer is installed, the weight of the bow shifts forward, sideways, and downward, changing the bow’s center of gravity and overall balance.
As a result, movement during aiming is reduced, and the bow’s motion and vibration at the moment of release become more controlled and stable.
...

The cushion plunger is a spring-structured device mounted on the side of the riser, designed to absorb the lateral impact applied to the arrow at the moment of release and to control its center movement.
It consists of a plunger tip, an internal spring, and a tension adjustment screw. When the a...

A plastic rest is a support on which the arrow sits, keeping it in the correct position until the release.
Made of plastic, it is the most commonly used component on beginner recurve bows.

It is a device attached to a recurve bow that helps you visually aim in the direction the arrow will travel.
It is one of the essential basic pieces of equipment for accurate shooting.
Mounted on the bow, it allows vertical and horizontal adjustments according to shooting distance and is indispen...

clicker is a metal (or carbon) plate device that indicates when the arrow has been drawn to a consistent length.
It produces a distinct ‘click’ sound to signal the shooting timing, acting as a helpful aid for the archer.
The clicker serves as a ‘timing signal,’ helping the archer draw the bow w...

The bow sling is a safety accessory that prevents the bow from slipping on the hand.
It allows the archer to shoot without holding the bow tightly with his fingers.
Unlike finger slings, wrist slings are worn on the wrist and fixed by winding a bow.
It is used as an aid to suppress excessive wris...

In arrow making, length measurement is the process of determining the arrow length according to the bow’s poundage, the archer’s physique, and posture, so that the arrows match the archer’s optimized draw length.
Uniform arrows are a key factor in improving accuracy and maintaining consistency in...

Limb setting is the process of adjusting the bow so that the string, limbs, and riser are precisely aligned.
If the limbs are twisted to the left or right, or if they are off the string’s centerline, the arrow may kick to one side and grouping can become inconsistent.
When properly set, the strin...

Aligning the sight center is extremely important.
If the sight bar that moves up and down is not positioned on a vertical line,
left–right deviations will occur when adjusting it vertically.
Therefore, once the sight is installed, ensuring the vertical center alignment of the sight bar is essenti...

矢セッティング_日本語吹替

 Side stabilizer is a short rod-type vibration control device that suppresses left–right bow movement and balances horizontal stability.
It is typically mounted on both sides through a V-bar, and it helps adjust vibration, torque, and the center of gravity, improving shooting posture stability a...